This solid state charge controller is suitable for both wet-cell and sealed lead-acid batteries and uses Pulse Width Modulation for optimal charging. The module is compatible with all types of solar arrays and is potted in epoxy resin making it splash proof and suitable for use in areas of high humidity. The charger features a night load output which will automatically connects the load during the evening and disconnects the load during the daytime. Reverse current flowing through the solar array is automatically blocked in this unit which removes the requirement for a separate blocking diode.Specifications:* Max input voltage 26VDC * Max input current 6 amps* Battery system voltage 12VDC* Rated charging current 6 amps* Load voltage 12VDC* Rated load current 6 amps* SLA charging voltage 14.3VDC +- 0.1 volt* Wet cell charging voltage 14.8VDC +- 0.1 volt
With an massive 20 amp current handling, this switchmode solar panel generator is lightweight, easy to install and does not require a heatsink. It installs easily and features automatic operation, LED power indication and boasts an efficiency up to 99.2% @ 20 amps. Not only does the regulator switch the solar panel in and out depending on the battery voltage, the regulator will disconnect the solar panel after approx 20 minutes at night fall to prevent any losses into the panel overnight.
Features:* Completely Automatic* Battery or Solar Power LED indication* Australian Made
Specifications* Terminals: 6.4mm spade lug* Suitable for 1 to 20 Amps* Handles open circuit panel voltages up to 30 Volts* Reverse Polarity Protected* Efficiency: 97.0% @ 5 Amps, 98.5% @ 10 Amps, 99.2% @ 20 Amps* Weight: 65 grams* Measures: 66(L) x 51(W) x 34mm(H)
You make a substantial investment in a solar power setup, so make sure you look after your expensive batteries. With this unit, you have total control over battery charging and power usage. The LCD shows the system status and 3 LEDs at a glance show battery charge status, load status and solar panel connection. Microprocessor is programmed with 3-stage charging algorithms and pulse width modulation duty cycles of 0 - 100% to provide optimum charge conditions and battery life. 12V/30A and 24V/20A models available.
This inverter is electrically isolated between the battery and secondary voltage. This allows earthing of both DC and AC circuits when required. It will deliver up to 150 watts of continuous power, while supplying surge currents up to 450 watts. DC input is through a 650mm lead with a cigarette lighter plug on the end. The cigarette lighter plug is fused with a 15A 3AG fuse, and the output is a standard 3 pin mains socket. There is a rocker on/off switch, and LED indicators for power and fault.
Typical Applications:
Laptop computers, recharging power tools or batteries, lamps and fluorescents up to 150W, fax machines etc.
Be sure that your cigarette lighter circuit can supply more than 15 amps.
Having a higher output makes this inverter useful for running a number of devices at the same time. Watch TV, charge the mobile and use the laptop at the same time, for instance. It has alarms for high/low battery voltage, overload protection and over-temperature. It also has a USB socket for charging MP3 players. A handy inverter suitable for a wide variety of applications.
Designed for higher powered applications, this inverter will easily run a number of household appliances from your car's battery when you don't have access to mains power. Ideal for camping and boating, it will run a TV and DVD player while someone else is using the laptop. It also has a USB socket for charging MP3 players or other devices.
Our new range of pure sine wave inverters are able to provide bundles of power in mobile and permanent installations. They range in power from 180 to 2000 watts and have been selected and rigorously tested for their durability and design. In addition to the normal 240VAC outlet, all models also have a USB port for powering all your gadgets. This range of sine wave inverters is suitable for any application where you want to run sensitive equipment and the larger units can be used in permanent installations such as caravan, 4WD, camper or even marine.
